Home » News » FAQ » How to avoid the phenomenon of automatic overturning of heavy trucks due to mechanical wear of dump trucks/ How to improve the anti overturning device of tipper tramcar?
How to avoid the phenomenon of automatic overturning of heavy trucks due to mechanical wear of dump trucks/ How to improve the anti overturning device of tipper tramcar?
Views: 0 Author: Site Editor Publish Time: 2022-09-26 Origin: Site
The problem can be solved by adding a device to prevent the automatic turnover of the car body on the car frame. That is to say, a movable knife clip is welded on the opposite corner at both ends of the mining car frame, and the knife clip is closed to block the carriage during the transportation of the mining car. In this way, the knife clip and the mechanical bolt of the mining car work together to firmly fix the carriage on the frame.
Note: During unloading, the diagonal knife clips at both ends of the tramcar must be opened to avoid damage and failure of the knife clips. After unloading, the carriage returns to the neutral position, the operator must close the knife clip.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.