Home » News » FAQ » How to conduct periodic fixed point maintenance on tramcar/ An effective method for periodic fixed point maintenance of tramcars?
How to conduct periodic fixed point maintenance on tramcar/ An effective method for periodic fixed point maintenance of tramcars?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
1. Establish rules and regulations for fixed point periodic maintenance and inspection and acceptance system.
2. Set up full-time maintenance personnel and one electric welder.
3. Establish special maintenance site, special track, and provide general installation tools.
4. All parts of the wheels to be repaired shall be comprehensively inspected and repaired, and the maintenance records shall be strictly filled in according to the maintenance items. The inspected tramcars shall be numbered as required.
5. The maintenance personnel shall be counted by quota and checked and measured according to the maintenance content.
6. Implement daily inspection and acceptance system, and it is strictly forbidden to operate on the track if the inspection and maintenance are unqualified.
7. The funds and materials for periodic maintenance of tramcars shall be effectively implemented.
8. Quality control during maintenance: for tramcars to be overhauled, parts to be replaced shall be prepared to ensure the maintenance quality of tramcars; The tramcar bearing shall be cleaned and oiled strictly. The bearing with excessive wear or contact fatigue spots shall not be put into use if its quality is lower than the intact standard.
9. Quality acceptance for maintenance: regular every day; Secondly, familiar engineering and technical personnel shall be assigned to strictly check, provide technical guidance and propose maintenance requirements.
10. The establishment of patrol inspection system is also an important part of periodic maintenance. After periodic maintenance of tramcars, they can generally operate well, but for various reasons, a few tramcars lose their effectiveness in operation. The patrol inspection system is established at the specified time. The maintenance personnel take the vulnerable parts and maintenance tools to replace them on both sides of the wellhead transportation roadway, which will not affect the operation time and ensure the safe operation of the tramcar.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.
