Home » News » FAQ » How to deal with the serpentine and deviation of the conveyor belt of DJ type high angle belt conveyor?
How to deal with the serpentine and deviation of the conveyor belt of DJ type high angle belt conveyor?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
1. Adjust the carrying idler group.
When the belt of the belt conveyor deviates in the middle of the whole belt conveyor, the position of the idler group can be adjusted to adjust the deviation; During manufacturing, the mounting holes on both sides of the idler group are machined with long holes for adjustment.
2. Install the centering idler group.
There are many types of centering idler groups, such as middle rotating shaft type, four-bar type, vertical roller type, etc. Its principle is to use blocking or the idler rotates in the horizontal direction to block or generate lateral thrust to make the belt automatically centripetal to adjust the belt deviation.
3. Adjust the position of the drive drum and the turning drum.
The adjustment of driving drum and turning drum is an important part of belt deviation adjustment. Since a belt conveyor has at least 2~5 pulleys, the installation position of all pulleys must be perpendicular to the centerline in the length direction of the belt conveyor. If the deflection is too large, deviation will occur.
4. Adjustment of tensioning position.
In addition to being perpendicular to the belt length, the two reversing rollers at the upper part of the counterweight tensioning position should also be perpendicular to the gravity vertical line, that is, ensure that the axis centerline is horizontal. When screw tensioning or hydraulic cylinder tensioning is used, the two bearing seats of the tensioning cylinder shall be translated simultaneously to ensure that the cylinder axis is vertical to the longitudinal direction of the belt.
5. The influence of the blanking position at the transfer point on the belt deviation. The blanking position of materials at the transfer point has a great influence on the belt deviation, especially when the projection of two belt conveyors on the horizontal plane is vertical.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.