How to improve the cleaning system of DT75 belt conveyor?

1. P-type H-type alloy rubber double scraper twice cleaner is used for the head.

According to the characteristics of small particle size and 10% water content of the material, the P-type H-type alloy rubber double scraper twice cleaner is used. The P-type H-type alloy rubber cleaner is suitable for cleaning the materials stuck on the working face of the return belt, and belongs to two sweepers. The contact pressure between the scraper of the cleaner and the conveyor belt can be automatically adjusted by using the elasticity of the rubber itself to ensure that the force between the scraper and the running conveyor belt is within the appropriate range, so that the material is cleaned without damaging the belt surface. As the sweeper adopts a special hard alloy scraper with high wear resistance, it has good comprehensive mechanical performance, compact structure, light weight and easy operation.

2. Two sets of spiral cleaning idlers are added.

In order to improve the cleaning effect of small particles and wet materials, two groups of spiral cleaning idlers are added behind the head cleaner. The spiral cleaning idlers are used to thoroughly clean the adhesive materials on the surface of the conveyor belt. The surface of the parallel lower idler is no longer bonded with materials, so as to ensure that the conveyor belt and the idler are worn evenly and operate stably. When using, pay attention to cleaning the materials under the spiral cleaning idler every 7 days.