Home » News » FAQ » What are the causes of scraper motor failure?
What are the causes of scraper motor failure?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
Motor fault is a common fault of scraper machine. There are three important cases: motor startup fault, excessive heat generation of motor and abnormal sound of motor.
The main cause of motor startup failure may be that the scraper is overloaded; The chain or some other component is seriously jammed; The power supply voltage cannot meet the rated requirements; The line is damaged and the power supply is abnormal; The starting voltage drop is too large due to insufficient transformer capacity; Or the mining face is not smooth; It may also be that the motor itself fails to start due to mechanical failure.
The reason for excessive heat generation of the motor may be that the motor fan stops running or the heat sink is seriously covered and the heat sink is blocked; The scraper has not been shut down for a long time, and is in the state of overload operation for a long time; The machine starts frequently, the starting current is large, the fuse is too large, and the motor works under the starting current for a long time.
The reason for abnormal motor sound may be that the scraper is in single-phase operation; The load is too heavy; The connector is loose and in poor contact; Bearing damage; The conveyor will be crushed due to rib spalling and roof fall.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.