Home » News » FAQ » What are the components of MX series scraper conveyor?
What are the components of MX series scraper conveyor?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
MX series scraper conveyor is mainly composed of head, body, scraper chain, tail, tensioning device, etc.
1. Head part
The handpiece is composed of handpiece and driving device. The machine head includes: casing, head wheel, head wheel shaft, bearing, stuffing box and discharge port, which are combined with the head frame and firmly installed on the foundation. The driving device includes motor, square coupling and reducer. Open drive chain. The driving device can be installed on the head frame or separately on the foundation.
2. Fuselage
The machine body is divided into upper and lower slots. The upper slot is a no-load section, and the lower slot is a loaded section, which is connected together by support and fixed with the foundation by a special bracket.
3. Scraper chain
The scraper chain is double chain outward. The scraper has transverse reinforcement and vertical reinforcement, and has good rigidity. The shape of scraper can be changed according to different materials and installation inclination. The scraper and chain plate shall be connected by bolts and spot welded after fastening. The chain is a roller plate chain, which is composed of internal and external chain plates, rollers, pin shafts and shaft sleeves.
4. Tail part
The tail includes the casing, tail wheel, tail shaft, bearing, slideway and sealing device, guide device and rotary control panel. It is fixed to the foundation by special support. The sliding part of the tail is connected with the tensioning device through the tensioning chain, bypassing the guide wheel.
5. Tensioner
The tensioning device is composed of chain wheel, shaft, bearing, tensioning chain, hammer box, hammer plate and frame, which are firmly installed on the foundation. By increasing or decreasing the weight plate, the tension of the scraper chain can be measured.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.
