Home » News » FAQ » What is the function of the tensioning device of the chain conveyor?
What is the function of the tensioning device of the chain conveyor?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
The tensioning device is an indispensable and important part of the chain conveyor. It is usually set at the tail of the conveyor and can be adjusted together with the tail wheel.
1. After the chain is loaded into the conveyor, it is loose without being tensioned and cannot work normally. The conveyor can only operate normally if it gets a certain pre tensioning force.
2. Usually, the tail wheel of the conveyor is a passive wheel, which rotates by the friction with the chain. Only through the tensioning device can enough friction force be generated between the traction component and the tail wheel to drive the tail wheel to rotate, which is particularly important for the smooth wheel surface and the tail wheel with groove smooth wheel surface.
3. The chain pitch will gradually increase due to wear, and the chain will gradually elongate. The tensioning device can compensate for the resulting elongation, and maintain the normal working state of the traction component.
4. When the traction component is properly tensioned, the suspension can be reduced and the friction with the shell can be reduced. It is also conducive to the engagement and disengagement of the chain and the head wheel.
5. The tensioning device with certain automatic tensioning effect can automatically adjust the small elongation or shortening of the traction component caused by the tension change randomly, and can play the role of load sharing.
6. The tensioning device is necessary for installation and disassembly. The traction component is loaded into the conveyor without tension. After loading, the tensioning device can be used to check whether the chain length is appropriate and whether it needs to be increased or decreased; When disassembling the traction components, the tensioning device shall be completely loosened, otherwise, the disassembly work will be difficult.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.