Home » News » FAQ » What problems should be paid attention to in the design of embedded scraper conveyor?
What problems should be paid attention to in the design of embedded scraper conveyor?
Views: 0 Author: Site Editor Publish Time: 2022-09-27 Origin: Site
1. Requirements of installation position on design. The embedded scraper conveyor can be installed outdoors or indoors. When it is arranged in the open air, rainproof measures shall be taken at the driving device of the embedded scraper conveyor head to prevent the motor from being damped; All interfaces shall be sealed to prevent rainwater from seeping into the man machine tank. If it is placed in the pit, attention shall be paid to the waterproof, drainage and lighting measures of the pit, and proper positions shall be reserved for cleaning and maintenance; At the same time, reasonable installation supports, maintenance channels or platforms, installation foundations and fixing methods shall be designed according to the actual installation situation on site.
2. The general design drive device of the embedded scraper conveyor does not have mechanical safety protection measures, but only uses the motor over-current protection device to prevent equipment overload or failure. The electrical control part is generally designed by the selection unit, so the monitoring protection device of the equipment should be considered in the design.
3. Purchase of standard parts and components.
Common and easily available products shall be selected as far as possible to reduce procurement costs and supply problems during replacement; Professional manufacturers shall be selected as far as possible to ensure stable product quality and improve the operating life of equipment.
4. The cost factors of the embedded scraper conveyor mainly include the manufacturing cost and the cost of purchased parts. At present, the price competition of the buried scraper conveyor is very fierce. On the premise of ensuring the product quality, it is very important to reduce the cost. The designer must fully consider this in the design.
At present, there are many kinds of trams for ore transportation in domestic mines, and large and medium-sized mines tend to use bottom dump and bottom side dump trams for transportation. Compared with other types of tramcars, these two types of tramcars can realize continuous loading and unloading
Good morning, young friends! Next, the small editor is ready to explain the relevant contents of the single hydraulic prop for the small friends. The small friends are also deeply impressed with the single hydraulic prop. I still hope that this explanation will bring some gains to my friends1. For n
In order to make the hydraulic acrow props work stable, give full play to the efficiency of the equipment, and extend the service life, in addition to strictly complying with the operating procedures, it is necessary to strengthen daily maintenance.Precautions for maintenance and management of singl
Shandong China Coal Mining Support Equipment Co., Ltd. was founded in the 1990s with more than 1100 employees. It now has 53 professional companies, 3 Hong Kong companies, 1 British Cayman company and 1 American company. It is a large diversified industrial group integrating intelligent equipment manufacturing, e-commerce, software research and development and intelligent logistics, which is cultivated and supported by the Ministry of industry and information technology, the Ministry of Commerce, the development and Reform Commission, Shandong Province and Jining City.
